Bike of the Month Feb 2020.
Coast Steve
1982 Kawasaki KZ1000R-S1 race clone,
Hand built over a 3 year span.
Kawasaki race engine expert, the late Larry Cavanaugh, carefully did all of the race porting and building of this cylinder head.
Oversize stainless valves
Web 110 race cams,
oversize valves
titanium keepers.
(Full race head gasket also during build.)
1136cc forged Weisco high comp piston big bore kit.
Approx 800 miles on engine rebuild.
APE thick diameter race engine head studs, APE tall race nuts. (both needed for high comp/race)
New Dyna ignition system with ignition plate, ignition coils.
Dyna 2000 computer box with 5 performance maps. (set to race# 5) Dyna adjustable rev limiter. (set to 10,000rpm)
Custom Works Aluminum S1 race replica tapered cone ignition cover and plate.
Keihin CR 33 racing carbs. (with choke)
K&N oiled air pod filters.
Special large diameter works racing pipe.
Has spring quick remove mounts and a proper race tuned merge collector. (We got an 8hp increase over the regular race Kerker)
Genuine S1 race bike 1/4 turn throttle with NOS S1 racebike heavy throttle cables
This bike has a strong powerband and is now tuned for sea level.
After 18 dyno runs:
126.9 Rear wheel HP.
Tuned on Factory Pro Eddy Current dyno.
(True HP numbers, not "dynojet" numbers. Have all charts)
(Estimated engine HP is 137-142 )
S1 full race replica brake calipers from Japan.
(Fully rebuilt new Japanese seals in all calipers.)
New sintered metal race brake pads from Japan.
US Made custom steel braided brake lines.
NOS Kawasaki fork lowers from Japan. Adjustable upper tubes are fully rebuildable. (circlip removes racing oil pumps in both forks.)
Motul 20 weight in forks.
Race tech springs in forks. (200 lb plus rider)
Works Performance racer rear shocks, fully rebuilt with new seals and new bladders.
Works shocks were rebuilt and set up by an 1980's pro superbike team shock builder (tuned to 200-240lb rider inc gear).
US made massive KZ1000R-S1 works replica handmade aluminum triple trees, (triple clamps)
Huge Japanese made 330 mm S1 replica solid brake disks with aluminum carriers.
(Use Motul Dot 5 always.)
Rare 160mph/250kmph speedo
NOS factory Kawasaki Tachometer.
S1 race replica handmade aluminum swingarm, (with built in catch can for racing.)
Marvic Classic 7 spoke magnesium race rims (new not old stock) 4 1/2" X18 and 3"x18 Genuine
Front rim has speedo drive, rear rim has cush drive. Both nice for street riding.
New Metzler Roadtec Interact Z8 M (soft compound) tires
160/60/ZR18- rear 120/70/ZR18 front
Frame has S1 superbike racing stiffeners added
Antigravity 3 lb battery.
Hollow grade 5 titanium front axle (US made titanium)
Full forged and formed titanium fastener kit on bike. (All USA made forged and formed titanium fasteners)
Full stainless engine fastener kit
530 race chain made in Japan, High grade aluminum rear sprockets custom made in USA.
Many NOS parts on this bike throughout.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
What to expect when riding:
This bike is for the experienced rider only.
The brakes are very strong, the whole package handles very tight, solid and predictable.
Power is strong with good low rpm torque, and very strong up to 5500rpm.
After 5500rpm engine starts to hit a 2 stroke like powerband, as front the end is lifting or gets light. Sometimes even in 3rd gear.
Although this bike is a bit of a handful at times, it can also be ridden sensibly on the road. But care must be taken.
We would like to continue featuring a different bike each month on kz1000r.com
that we feel is deserving of the title "Bike of The Month."
To nominate or submit your own bike for "Bike of The Month."
Send some info on yourself your bike and loads of pic's bigger the better.
PLEASE SEND IN YOUR INFO IF YOU ARE LUCKY ENOUGH TO OWN ONE OF THESE BIKES!
I really want to bring THIS Registry up to date again so accurate number's left in circulation can be made available,
this will intern help us get a true market value for insurance purposes.
Please include the chassis number and the month of production printed on the headstock of your bike.
Your name and location. and most importantly a picture's of your bike.
E-mail me at: This email address is being protected from spambots. You need JavaScript enabled to view it.
Featured Listing: 1983 Kawasaki KZ1000R Eddie Lawson Replica.
This Featured Listing is part of the The Bob Benyo Collection.This 1983 Kawasaki KZ1000R Eddie Lawson Replica makes as much of a statement today as it did when it rolled out of Minato City 37 years ago. In ‘83, the bikes announced what those who followed AMA Superbike racing already knew: That Japanese bikes were about to take over road racing for good, with the help of a brave, skinny Californian kid named Eddie Lawson. Today, this bike’s impeccable, unrestored condition sets it apart.
1983 Kawasaki KZ1000R ELR for sale on eBay
With Steady Eddie aboard, the KZ1000Rs stormed to the AMA Superbike title in 1981 and 1982, and the ‘83 ELR looked like it was an eyelash from the bike that did the deed.
The bikini fairing, boxy tank, deep-dished seat and ducktail rear cowl were lifted right from the 1982 GPz1100, but the unmistakable lime green and electric blue livery were all racebike. Gold wheels finished off the look, and a Kerker pipe and reservoir shocks meant it sounded fierce and handled its weight and power with aplomb.
This one has fewer than 1,800 miles on the clock, and has had a minor refresh but is otherwise as it was purchased. The clutch is new, the carbs have been freshly cleaned and painted, and couple cosmetic pieces were swapped out for NOS parts. Otherwise, it’s all original. As a bonus, it will be supplied with a set of NOS bodywork, from the fenders to the tank.
From the eBay listing:
1983 Kawasaki kz1000r Eddie Lawson superbike replica near perfect all original! Multiple award winning with all “NOS” body parts coming out of my private collection.
Multiple award winner just won 1st place best original Japanese bike. The judges from the pebble beach event were blown away at how perfect she was.
This bike underwent minor clean up/refresh at my shop globe motorcycles limited. I used a full set of “NOS” body work so very hard to find i only have 2 full sets left. I swaped out the engine side covers with “NOS” units and new OEM gaskets and seals.
I have had this bike for several years and it has been the elr that i ride. She looks and rides as good as she did back in 1983.
The engine:
Serial number kzt00je041780 the engine is the original that came with the bike. I get asked this question all the time, why are’nt the ELR engine numbers ever close or similar to the frame numbers? The engine numbers have a specific range they must fall into for 1982 and 1983 kz1000r’s. This is the engine that came with the bike when she was new and is in the correct serial number range for a late 1983 elr.With only 1789 miles it the engine ran great when i got her but i opted for her to run a bit better since i wanted to ride her. I installed a new hd clutch, all new OEM seals, pushrod, and gaskets (its just what i do). The engine itself has never been painted so no paint whent where it does not belong. The engine side covers were replaced with “NOS” units, very hard to find.
The carburetors were completely disassembled ultrasonically cleaned, and painted just as the factory did, resembled and synchronized. I re-jetted them with #132 main jets and raised the jet neddle with one washer to aid in running better with the competition baffle.
The frame:
The frame and swing arm are all original paint and look better then any of the other original elr’s i have had.
The tires have been replace with Dunlop k400’s (k300’s are not available). The grips, levers, mirrors, , end caps are all “NOS”.
The seat is all original with no blemishes.The Kerker KR exhaust is the original unit that i had re coated to the original kal*gard finish and installed with OEM copper gaskets. The Kerker side emblem, the hanger bracket/bushing assembly, and the large competition baffle are all NOS ($500). The fuel tank, petcock, fuel guage sender, fuel cap, side covers, front cowl, rear cowl, front fender, tail light, wind shield and rubber seal, emblems, and associated hardware are all “NOS over $7500 worth of unobtainium. A modest amount of NOS/OEM hardware was used.
Tell your wife this is a great investment that will only go up in value unlike her shoe and handbag collection :). So here is your chance to own the best example of 1 of the 750ish 1983 Kawasaki kz1000r Eddie Lawson superbike replica’s ever built for north America. It is as close to when it came out of the crate with the exception of the Dunlop k400 tires and a very small amount of patina on the wheels. I will refinish the wheels to exact OEM specs for the new caretaker at my cost if he or she prefers “NOS” looking wheels (a very expensive process). I will for sure cry when it sells but i am blessed to have a few more ELR’s.
I have owned more then 20 ELR ‘s in the 15 years and have the largest inventory of ELR parts so bid with confidence. This bike will not disappoint. Please feel free to contact me with any questions 954-816-0806 Bob. Please come see her first if you have any doubts. I have been riding, racing, fixing, restoring, and collecting special bikes since graduating from American motorcycle institute “AMI” in Daytona beach Florida.
This ELR belongs in a museum so don’t miss out. I restored and preserved more bikes then i can count and have satisfied owners around the world with giant smiles on there faces every time they look at what the bought. The last 2 ELR s i sold (a 1982 and a 1983) went to Japan. They both had NOS body parts on all original bikes with low miles and sold for $28,500 and $36,000 and just not a perfect as this one.
The original tool kit, owners manual, and 2 keys come with the bike. The first buyer to hit the buy from the 2 ELR’s i have for sale will get my autographed custom painted 1983 bell helmet. The second one will end up with a custom painted 1983ish bell helmet that we will have to send to Eddie and wait for him to sign it.
Lets keep e-bay a great place to do business and only bid if you are planning to buy it.
$1000 deposit and the balance within 3 business days in cash or bank wire. I can store the bike for a few months and help arrange shipping
With ELRs getting rarer by the day, and NOS bodywork essentially unobtanium, we imagine it would be impossible to find another one like this. It’s a collector’s dream and an absolute museum piece.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
This Featured Listing is part of the The Bob Benyo Collection.
Kawasaki won the AMA Superbike championship in 1981 and again in 1982, thanks in part to a young rider known as Eddie Lawson. To celebrate the championship and build better brand awareness, Kawasaki built a lime green replica race rocket in 1982 commonly known as the Eddie Lawson Replica (ELR). The official name for the bike was the KZ1000R, which was based on the “J” model KZ1000. Kawasaki modified the top end with parts from the GPz1100 to create a hybrid 1 liter super bike good for 102 HP and 130+ MPH. Besides, it simply looked screaming fast even when on its side stand (no center stand included). Today’s ELR is a 1983 model – which, technically, was called the Superbike Replica since in that year Lawson jumped to 500cc GP racing under the Yamaha banner. But to fans, these models will always be ELR – missing only the number 21 on the number plates. And speaking of 21, this particular bike probably scores a 21 on a scale of 1-10 when it comes to condition. Originally owned (and raced) by Terry Vance from Vance & Hines Racing, this KZ1000R has been reborn as a perfect-as-you-can-get example of the breed, with no part passed over. Read on from the seller, and dive deep into this glorious restoration.
1983 Kawasaki KZ1000R ELR for sale on eBay
From the seller:
1983 Kawasaki KZ1000R Eddie Lawson replica museum quality concours d’ elegance award winning “OCD” restoration with all “NOS” body parts coming out of my private collection.Multiple award winner just won “Best in class” in the Boca Raton concours d’ elegance for best restoration. The judges from the Pebble Beach event really thought it just came out of the crate! They were blown away at how perfect the restoration was.
This bike underwent a massive full nut and bolt “OCD” restoration at my shop Globe Motorcycles Limited. With over 500 man hours this was by far my most extensive restoration Gaston, Phil and myself have ever done. I used a full set of “Nos” body work so very hard to find I only have 2 full sets left. Digging in deep into my large inventory of “NOS” and spare ELR parts I use a massive amount of parts that are now impossible to find. There is over $15,000 worth of “NOS” parts on this bike.I will try to list them all but I am sure I will leave out so many that the new caretaker will see when he or she is staring at it for hours and hours.
The bike came to me from a collector that bought it from Terry Vance yes that Terry Vance. Terry had used it in late 1983 and into 1984 as his Kawasaki Pro Stocker winning the NMRA portion of the NHRA Winston World Finals (see the article in Cycle World 1983). Byron Hines was out to prove he could build any of the 4 Japanese brand engines into world class winners. After winning Terry used it as a display at the track but Suzuki was less then happy with that idea it ended up in the back of a shipping container for over 25 years. Missing many OEM parts and with the frame raked for drag racing (the original engine came with it as Byron built up a GPz1100 for the track) it was in need of some serious help. With only 1500 on the engine that was easy part of this project. I sent the frame to the best frame Dr. in the US GMD motorcycle frame shop outside Atlanta GA. Using the latest technology Kent brought the frame right back to OEM specs (not a fast or inexpensive process). Then the magic began.
More from the seller:
The engine:
Serial number kzt00je042085 the engine is believed to be the original that came with the bike. The ELR engine numbers are never close or similar to the frame numbers but have a specific range they fall into for 1982 and 1983. This is the engine that came with my purchase and is in the correct serial number range for an early 1983 ELR.With only 1500 original miles it was disassembled inspected and reassembled with a new HD clutch and all new OEM seals and gaskets. The engine was painted with the correct low sheen while it was disassembled as the factory did so no paint whent where it does not belong. The engine side covers were refinished in the correct gloss black and the engraved covers highlighted with the correct gold paint.
The carburetors were completely disassembled ultrasonically cleaned, and painted just as the factory did, resembled and synchronized.
More from the seller:
The frame:
The frame and swing arm were sandblasted and treated for rust prevention primed and painted in the correct sheen using the best PPG products. All the bearings and seals replaced with OEM parts. All the cables replaced with OEM/NOS parts. The brake system was disassembled completely rebuilt with NOS/OEM parts boasting NOS/OEM front and rear rotors (can’t find them again $1400). The shocks were disassembled painted the correct gold and finished with original decals. The front forks were disassembled rebuilt with OEM parts and painted back to the original sheen and finished with the correct decal. The front and rear wheels were sand blasted primed and painted in the correct gold finish and the outer lip polished to the correct shine. The center spokes of the wheels still show the original small cuts from the machining when the wheel was manufactured (most restorers polish that away not good). NOS/OEM bearings/seals were installed(over 65 hrs just on restoring the wheels). The rear wheel hub/sprocket and chain assembly is NOS. Dunlop K400 series tires installed (K300’s not available). The grips, levers, mirrors, switches, end caps, foot pegs, turn signals, and all the hardware are NOS $$$$$. The seat cover and pading is NOS $$$$ it was the only NOS seat cover I have ever seen (priceless). The rear fender and chain guard are NOS. The Kerker KR exhaust, the side emblem, the hanger bracket assembly and the baffle are all NOS ($3000). The fuel tank, petcock, fuel gauge sender, fuel cap, side covers, front cowl, rear cowl, front fender, tail light, wind shield and rubber seal, emblems, and associated hardware are all “NOS” over $7000 worth of unobtainium. A ridiculous amount of NOS/OEM hardware was used, and the original hardware used was painstakingly individually prepped and re-stained in the correct dark green finish (not easy to do).
More from the seller:
Tell your wife this is a great investment that will only go up in value :). So here is the only chance you will probably ever have to own the best example of 1 of the 750ish 1983 Kawasaki KZ1000R Eddie Lawson replica’s ever built for north america. It is like it came out of the crate with the exception of the Dunlop K400 tires. I will for sure cry when it sells but I blessed to have a few more ELRs they just wont be as perfect.The original tool kit, owners manual, and 2 keys come with the bike. I have owned more then 20 ELRs in the 5 years and have the largest inventory of ELR parts so bid with confidence this bike will not disappoint. Please feel free to contact me with any questions 954-816-0806. Hit the Buy It Now and I will throw in my autographed custom painted 1983 Bell helmet.
The Kawasaki KZ1000R is a hot commodity in the market these days. And with the original bike nearing forty years of age, time, use and the lack of spares has taken its toll on the available pool. With lower volume and high demand, prices follow. Bikes that you remember “back in the day” that you could buy used for lunch money have suddenly jumped to stratospheric levels. ELR models definitely apply here, as even rough examples are selling strong. And restoring one is no picnic – for many original parts are no longer available. To rebuild a bike that has the history that this one does, to the level that this bike has been painstakingly recreated, would take time and resources beyond the imagination. Likely the best example of the rare breed known as the ELR we have ever seen on these pages (and we have seen some pretty good ones that now pale in comparison) this particular bike is available right now on eBay. Check out the auction here and be astounded by the workmanship. You might be shocked by the values as well, but perfection does not come easy or cheaply. Ding the Buy It Now bell and score a matching helmet complete with Steady Eddie’s gold signature. Destined for museum duty, this 1983 Kawasaki ELR reminds us of the high water mark of old school Superbikes. Good Luck!!